Honeywell Uvex™ Bionic® Face Shield Lightweight face shield provides all-day comfort and full protection from chin to the top of the head. Panoramic polycarbonate window furnishes increased visibility and minimal blind spots. Efficiently shuts out airborne dust, dirt and debris.

KleenGuard™ A20 Breathable Particle Protection Hood Particle protection hood with elastic face opening for comfort and convenience. Breathable, patented MICROFORCE* barrier SMS fabric. Ideal for use in situations when workers come in contact with dirt and grime.

3M™ Deluxe Headgear with Ratchet Adjustment High-strength thermoplastic crown protector provides impact resistance. Five-position crown strap and adjustable ratchet suspension help provide a precise fit. No snaps, cams or bands needed. Must be used with 3M faceshields only (sold separately). Test compatible with 3M™ E-A-R fit™ Validation System.

ergodyne® Skullerz 8965 Lightweight Bump Cap Hat with LED Lighting This comfortable and stylish hat features micro-LED lights and a ventilated impact-resistant shell for breathable protection against bumps, scrapes, bruises and other minor head injuries. At less than 5 oz, this incredibly lightweight bump cap delivers optimal comfort without compromising safety. Built-in dual-action LED lights under the brim emit 44 lumens for ultra-bright, hands-free visibility in the dark without flashlights or bulky headlamps. The LED task lights allow for close-up or distance lighting for visibility where you need it most. Run time is up to 11 hours with use of four CR2032 lithium-ion batteries (included). This bump cap tackles two big challenges workers face in the field: weight and heat. The removable bump cap insert is made of a lightweight but durable high-density polyethylene (HDPE). Lining the insert is a removable, washable and anti-microbial EPP foam pad.

Suncast Commercial® Full Length Replacement Shield Optically clear shield is compatible with Suncast Commercial® face shields. Latex free, full length shield easily secures into the headgear of unit HGASSY16.

deflecto® Disposable Face Shield Protect employees/customers and promote social distancing with their own personal sneeze guard. Provides single-use protection to be used in stores, pharmacies and all other essential businesses.

ergodyne® Skullerz® 8993 Hard Hat Safety Light This hard hat safety light easily attaches directly to any Skullerz® Hard Hat or Safety Helmet light mount for use as a beacon light. When clipped to the back built-in mount, it will throw red light in four directions to keep workers visible and safe from far distances in low-light conditions. It features a built-in magnet on the back for securely attaching the light to metal on the worksite or for storing when not attached to a hard hat or helmet.

Suncast Commercial® Fully Assembled Full Length Face Shield with Head Gear Engineered to help protect the face and provide an additional barrier with other PPE products. Two fully assembled straps provide a secure fit, while the foam band across the forehead adds comfort for extended wear. Can be worn with or without safety glasses, as well as a mouth covering. Latex-free. Ideal product to be worn as added face protection where maximum face protection is the goal.

ergodyne® Skullerz 8944 Soft Universal Bump Cap Insert A soft foam version of our best-selling Skullerz 8945 Insert, the 8944 Insert easily inserts into any baseball cap, hat or other headwear for ultra lightweight and comfortable protection against bumps, scrapes, bruises and other minor head injuries. With flexible foam and convenient trim-to-fit customization, this bump cap insert easily and comfortably fits a variety of hats/caps and head shapes. The closed cell foam won't absorb moisture or odors for fresh all-day wear. Not bulky like a hard hat, bump caps are typically worn in spaces where hard hats aren't required but worker-generated impact head protection is needed—including low ceilings, beams, low pipes and other bump hazards. They are ideal for mechanics and airline baggage handlers, as well as workers in factories, in-home services and other industries that do not require safety hard hat protection.

ergodyne® Skullerz 8975 Class C Safety Helmet Class C (Conductive) helmet features a unique, vented shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. Adjustable exterior venting keeps your head cool (when open) or warm and dry (when closed). A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

ergodyne® Skullerz 8972 Class C Hard Hat Cap Style This Class C hard hat is heavy-duty yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This cap-style brim can be worn backwards to improve upward visibility or forward to keep sun and rain away from the eyes. The open frame design in combination with the adjustable venting offer the best of both worlds: a cooler hard hat in the heat and a dry hard hat in the rain. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off.

KleenGuard™ V90 Series Face Shield Versatile face shield conforms to the contours of your face to provide effective protection from liquid splashes and light airborne debris. Detachable goggles can be worn separately. Cylindrical lens affords a wide-range view.

ergodyne® Skullerz 8970LED Class E Hard Hat Cap Style with LED Light The Class E hard hat with LED light is heavy-duty, yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This cap-style hard hat can be worn backwards to improve upward visibility or forward to keep sun and rain away from the eyes. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off. Built with weight distribution in mind, this hard hat's snug fit balances perfectly on the head and doesn't slip off.

ergodyne® Skullerz 8974 Class E Safety Helmet Class E (Electrical) features a dielectric shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

ergodyne® Chill-Its 8937 Performance Cooling Baseball Hat Features an evaporative cooling sweatband and lining that wicks sweat and moisture when worn dry and provides immediate cooling relief when worn wet. Vented back panels increase airflow for breathable comfort, and an anti-odor treatment makes for fresh all-day wear. The black reflective logo and piping enhance visibility in low-light conditions while remaining low-profile for daytime wear. One size fits all, this cooling hat features a hook & loop closure for an adjustable fit. Ideal for construction, landscaping, roofing or anyone working in the heat. It can also be used to reduce the risk of heat stress for outdoor recreational activities.

3M™ 6000 Series Full-Facepiece Respirator-Mask Faceshield Cover Designed for 6000 Series full-facepiece respirator masks. Protects lens from scratches and nicks.

ergodyne® Skullerz 8950XL XL Bump Cap Hat A comfortable and stylish hat with an impact-resistant shell for protection against bumps, scrapes, bruises and minor head injuries. This XL hat is sized specifically to fit larger heads and hairstyles. The removable bump cap insert features a patented flanged design and foam cushioning liner for comfort and breathability. The nylon hat features reflective piping that keeps workers safe and seen in low-light situations. Not bulky like a hard hat, bump caps are typically worn in spaces where worker-generated impact head protection is needed, like low ceilings, beams, low pipes and other bump hazards. They are ideal for mechanics and airline baggage handlers, as well as workers that do not require safety hard hat protection.

ergodyne® N-Ferno 6819BT Be Tenacious Beanie Acold weather essential featuring an acrylic outer shell, a soft moisture wicking CoolMax liner and BeTenacious messaging. The outside of the stretchable winter hat is made of 100% acrylic and the interior is lined with a lightweight superior moisture wicking polyester for quick-drying comfort in all conditions. The snug fit keeps heat in when the temperature drops and provides a comfortable way to layer. It's the perfect thermal cap to wear underneath a helmet or a hood. Be ready for any outdoor excursion with this classic knit cap sized to fit most noggins small and large. It measures 8.5 high x 9.25 wide and is machine washable. Whether you're hitting the mountain, shoveling your driveway, going for a winter jog or working in cool-to-cold climates, this stylish beanie is sure to become a fall and winter staple.

ergodyne® Chill-Its® 6700/6705 Bandana/Headband Provide cool comfort 24 to 48 hours when activated in cold water. Super absorbent acrylic polymer activates easily and quickly when soaked in cold water 20 minutes. Reusable, just resoak.

ergodyne® Chill-Its 6700 Cooling Bandana Polymer Tie Headband Activated polymers in this evaporative cooling bandana bring cooling power where you need it most. Low-profile for no-bulk wear under hard hats. 100% cotton exterior. Adjustable tie closure for a snug, comfortable fit on a variety of head sizes. Hand wash and hang in open air until completely dry.

ergodyne® Skullerz® 8975LED Class C Safety Helmet with 8981 Universal LED Headlamp Class C (Conductive) helmet features a unique, vented shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. A low-profile brim helps improve visibility, and an included Skullerz Hard Hat LED Headlamp helps illuminate your way. Adjustable exterior venting keeps your head cool (when open) or warm and dry (when closed). A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

ergodyne® Skullerz 8971 Class E Hard Hat Full Brim The Class E full brim hard hat is heavy-duty yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This full brim hard hat provides 360 degrees of protection from sun and rain. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off. Built with weight distribution in mind, this hard hat's snug fit balances perfectly on the head and doesn't slip off.

ergodyne® Chill-Its 6670CT Cooling Hard Hat Neck Shade - PVA Neck shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The lightweight shade features advanced PVA (polyvinyl alcohol) cooling technology for instant cooling without bulk or slime, with a wide panel that extends down for complete back-of-neck-coverage. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook and loop straps.

ergodyne® Chill-Its 6715 Hard Hat Cooling Pad - Polymer The hard hat cooling pad straps into hard hats to deliver four hours of cooling relief. The low-profile and lightweight liner pad features cooling acrylic polymers for instant cooling without bulk or slime, making it comfortable to wear under hard hats. This hard hat liner fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook and loop straps.

ergodyne® Skullerz® 8991 Safety Helmet Visor This safety helmet visor is designed to increase eye and face protection for those using a Skullerz® Safety Helmet. It features a UV protective Z87 lens with a permanent anti-fog and a scratch-resistant hard coat tested to EN166. Use the included attachment hardware to seamlessly integrate into a dedicated mounting location on the safety helmet. The visor lens features a permanent Fog-Off anti-fog that won't wash or rub off for clear viewing no matter the job particularly useful for those working with dust masks or in extreme temperature change.

ergodyne® Chill-Its 6660 Hard Hat Brim + Neck Shade Attaches to hard hats to shade the face and neck for protection against sun damage. This full brim shade fits most hard hats, with an elastic rim plus hook and loop attachments for securing to the suspension. A durable plastic ring makes sure the brim holds its shape and a wide panel shade extends down for complete back-of-neck coverage. Hi-vis colors to keep workers safe and seen. Hand wash as needed and hang to dry. Ideal for those working in hot environments where shade is needed, including construction, roofing and landscaping.

SCT® Face Shield Personal protective equipment for healthcare, dental, sanitation, industrial, and food service professionals, retail store workers and patrons, and delivery drivers. Designed to be worn over mouth mask and can be worn with or without a mouth mask. Perfect for areas where higher protection might be required, such as medical facilities, manufacturing facilities, grocery stores, airplane, etc.

ergodyne® Skullerz 8960 Bump Cap with LED Lighting This comfortable, stylish cap features a nylon-fabric shell, micro-LED lights under its brim and a removable, impact-resistant insert to provide the wearer with extra illumination and protection against bumps, scrapes, bruises and other minor head injuries. Operates on four CR2032 lithium-ion batteries (included).

ergodyne® Skullerz 8955 Lightweight Bump Cap Hat A comfortable and stylish hat with a ventilated impact-resistant shell for breathable protection against bumps, scrapes, bruises and other minor head injuries. This incredibly lightweight bump cap delivers optimal comfort without compromising safety. This bump cap tackles two big challenges workers face in the field: weight and heat. The removable bump cap insert is made of a lightweight but durable high-density polyethylene (HDPE) with maximum ventilation for all-day breathability that doesn't compromise protection. Lining the insert is a removable, washable and anti-microbial EPP foam pad for enhanced comfort, protection and airflow. This pad also helps prevents sweat from dripping down into eyes. Vents in the insert and foam pad channel heat away from the head and cooling channels allow additional airflow above the pad.

ergodyne® Chill-Its 6717FR FR Cooling Hard Hat Pad and Neck Shade The fire-resistant cooling pad with neck shade straps into hard hats to deliver four hours of cooling relief while also meeting ASTM F1506 for arc flash protection and flame resistance. The low-profile and lightweight liner pad with shade features cooling acrylic polymers for instant cooling without bulk or slime, making it comfortable to wear under hard hats. The wide panel shade extends down for full back-of-neck fire-resistance coverage as well as protection from sun damage. This hard hat liner pad fits most hard hats and safety helmets, easily attaching to the suspension with two hook and loop straps.

ergodyne® N-Ferno 6832 Spandex Balaclava Face Mask Made with lightweight, stretchable spandex, and features a three-panel design for all-day comfort, plus full head and facial protection. Perfect for use under hard hats or other head protection. The polyester/spandex blend dries quickly and wicks moisture away from the skin. The three-panel design allows freedom of movement in any direction. The long length extends below the neckline for full coverage and added protection from the elements. Reflective accents offer visibility at night or in low-light conditions. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This winter face mask is perfect for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports.

ergodyne® Skullerz 8946 Baseball Cap with Bump Cap Insert The Skullerz 8946 is a customizable, standard baseball cap designed to integrate with the best-selling Skullerz 8945 Universal Bump Cap Insert (included) for use on worksites where hard hats aren't required, but added head impact protection is still needed to shield against bumps, scrapes, bruises and other minor head injuries. Designed with logo customization in mind, this baseball cap provides a never-before-seen combination of form and function. In addition to the bump cap-compatibility, the hat features reflective brim piping for added visibility, a one-size-fits-most adjustable hook & loop closure and a mesh back half for breathability. The bump cap insert is a lightweight, impact-resistant shell featuring an interior foam pad for additional impact protection and comfort. Worn alone, this customizable baseball hat is a stylish option for everyday wear.

ergodyne® Skullerz 8945 Universal Bump Cap Insert Lightweight, impact-resistant shell that easily inserts into any baseball cap, hat or other headwear for protection against bumps, scrapes, bruises and other minor head injuries. With flexible sides and convenient trim-to-fit customization, this bump cap insert easily fits a variety of hats/caps and head shapes. The shell is made of lightweight, durable polypropylene and designed with maximum ventilation for breathable airflow that doesn't compromise protection. An interior foam pad reduces impact but does not absorb odors for fresh all-day wear.

ergodyne® Chill-Its 6634 Performance Knit Cooling Headband Low-profile wrap wicks away sweat and moisture when worn dry and provides evaporative cooling relief when worn wet. The stretchy performance knit fabric and contoured design makes for a snug, comfortable fit on most head sizes. This skull wrap is rated to UPF 50+ for protection against the sun's harmful UV rays and features an anti-odor treatment for fresh all-day wear. A reflective accent enhances visibility in low-light conditions. The low-profile design fits comfortably under a hard hat or helmet and is a great option for those with longer hair/ponytails. Ideal for construction, landscaping, roofing or anyone working in the heat. It can also be used to reduce the risk of heat stress for outdoor recreational activities. In order to activate, just soak in water until saturated, then wring out excess water. The evaporative cooling process begins instantly and lasts for hours when worn in environments with suitable airflow.

ergodyne® Skullerz® 8975-MIPS Class C Safety Helmet with MIPS® Technology Class C (Conductive) helmet features the MIPS® Elevate Safety-Suspension System to increase all-over head protection by reducing the rotation effects associated with dangerous angled impacts, while providing additional side-impact protection along with excellent top-, front- and back-impact protection. Adjustable exterior venting keeps your head cool (when open) or warm and dry (when closed). A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

AbilityOne® SKILCRAFT® Safety Helmets Cap style safety helmet is molded from high density polyethylene. Features short peak and trim profile. 4-point woven nylon suspension. Easy Quick-Slide sizing adjusts for head sizes 6 1/2" - 8".

ergodyne® N-Ferno 6804 Skull Cap Winter Hat with LED Lights Winter hat with LED Lights is a premium compression knit beanie hat with four built-in dual-action LED lights, making it an ideal hands-free lighting solution for any cold weather situation. Simply click the button on the front of the skull cap hat to switch between two light settings—angled lights for close-up tasks and out lights for distance viewing up to 72 feet. With a 48-lumen output, this LED beanie is powerful yet low-profile enough for everyday wear. With up to 68-hours of runtime for each battery change, you'll always have visibility when you need it most. This knit winter hat is a great choice for winter weather. Soft compression fleece offers a snug fit, with heat-trapping warmth. Ideal for those who work outside, in low-light conditions, garages, warehouses and for those doing detailed work where extra light is needed.

ergodyne® Skullerz 8971LED Class E Hard Hat Full Brim with LED Light The Class E full brim hard hat and LED light is heavy-duty, yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This cap-style hard hat can be worn backwards to improve upward visibility or forward to keep sun and rain away from the eyes. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off. Built with weight distribution in mind, this hard hat's snug fit balances perfectly on the head and doesn't slip off.

ergodyne® Chill-Its 6716 Cooling Hard Hat Liner - Polymers The evaporative cooling liner straps into hard hats to deliver four hours of cooling relief. The low-profile and lightweight liner features cooling acrylic polymers for instant cooling without bulk or slime, making it comfortable to wear with hard hats. This hard hat sweatband fits most hard hats and safety helmets, easily and securely attaching to the forehead of the suspension with three hook and loop closures.

ergodyne® Skullerz 8945F(x) Universal Bump Cap Insert - Extra Venting The next generation of best-selling Skullerz 8945 Insert, the 8945F(x) Insert with extra venting delivers enhanced breathability and up to 35% more crown impact protection. This lightweight and breathable impact-resistant shell easily inserts into any baseball cap, hat or other headwear for protection against bumps, scrapes, bruises and other minor head injuries. With flexible sides and convenient trim-to-fit customization, this bump cap insert easily fits a variety of hats/caps and head shapes. The shell is made of lightweight, durable polyethylene with a ribbed top for stronger crown impact protection. All-over venting maximizes airflow for cool comfort, while an interior foam pad reduces impact without absorbing odors for fresh all-day wear.

ergodyne® Chill-Its 6717 Cooling Hard Hat Pad and Neck Shade - Polymers The evaporative cooling liner pad with neck shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The low-profile and lightweight liner pad with shade features cooling acrylic polymers for instant cooling without bulk or slime, making it comfortable to wear under hard hats. The wide panel shade extends down for complete back-of-neck-coverage. This hard hat liner pad fits most hard hats and safety helmets, easily attaching to the suspension with two hook and loop straps.

ergodyne® N-Ferno 6850 2-Layer Cotton Regular Winter Liner Winter hard hat liner has two layers of insulation with a cotton shell and a comfortable polyester fleece lining for exceptional warmth. This lightweight thermal liner is chin-length to keep head and ears covered and fits comfortably under helmets or hard hats without feeling too bulky. The outer shell is made with 100% cotton twill to stand up to tough environments. The 100% polyester fleece lining is soft to the touch for comfortable all-day wear. A hook and loop chin strap comfortably secures this winter liner, while four exterior hook and loop straps attach to the interior of a hard hat for a secure attachment and added warmth. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug against the face to trap body heat in and keep cold out. Small pockets by the ears are designed to hold regular-sized hand warmers (sold separately) to keep ears warm and comfortable in extreme temperatures.

ergodyne® Skullerz® 8974V Class E Safety Helmet with 8991 Visor Kit Class E (Electrical) helmet features a dielectric shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8. Included easy-mount visor features a UV-protective, scratch-resistant z87 lens and Fog-Off technology.

ergodyne® Chill-Its 6650 High-Performance Hat Plus Neck Shade This high-performance cooling hat with neck shade is made with Hi Cool moisture-wicking technology to keep workers comfortably cool and dry while shading the head, face and neck against sun damage. It is rated to UPF 50+ for protection against harmful UV rays. The Hi Cool performance fabric wicks moisture for quick drying, while the absorbent terry cloth sweatband prevents sweat from dripping into eyes. This work hat is lightweight and breathable for comfortable all-day wear. The wide panel neck shade extends to ears for complete coverage, while an adjustable cinch cord on the back makes for a snug and custom fit on a variety of head sizes. Machine wash as needed and hang to dry. Ideal for those working in hot environments where shade is needed, including agriculture and landscaping. Can also be used for outdoor recreation such as hiking, fishing or gardening.

ergodyne® Skullerz 8950 Bump Cap Hat A comfortable and stylish hat with an impact-resistant shell for protection against bumps, scrapes, bruises and other minor head injuries. The removable bump cap insert features a patented flanged design and foam cushioning liner for comfort and breathability. Offers unobtrusive wear in cramped work environments. The nylon hat features reflective piping to keep workers safe and seen in low light situations.

ergodyne® Chill-Its 8935CT Hi-Vis PVA Ranger Sun Hat A lightweight and breathable sun protection hat with advanced PVA cooling technology lining the rim for relief in extreme heat. This 150D polyester sun hat features a wide brim for complete face and head coverage, while 360-degree mesh venting maximizes airflow for breathable comfort. The hi-vis colors and 1" reflective tape are ANSI 107-approved to keep workers safe and seen. Heat-related illness continuously ranks among the top causes of worksite accidents and fatalities. Evaporative cooling technologies such as PVA (polyvinyl alcohol) are a simple, effective and comfortable solution for heat stress prevention. Similar to how sweat cools the body, evaporative technologies use an external water source to draw heat away-helping to regulate body temperature while providing cool relief. When activated, this cooling ranger hat is comfortable and refreshing for even the hottest days of the year.

ergodyne® Chill-Its 6605 High-Performance Terry Cloth Sweatband The high-performance headband is made with Hi Cool moisture-wicking technology to keep workers comfortably cool and dry on hot days. The Hi Cool performance fabric wicks moisture for quick drying, while the absorbent terry cloth sweatband prevents sweat from dripping into eyes. This low-profile cooling headband can be worn alone or under a hard hat. One size fits most, the back features elastic that stretches to comfortably fit a variety of head sizes. Machine wash as needed and hang to dry. Ideal for construction, landscaping, roofing or anyone working in the heat. It is also a great headband for running, hiking and other recreational activities.

ergodyne® N-Ferno 6882 2-Layer FR Cotton Shoulder Winter Liner Winter hard hat liner has two layers of insulation with fire-resistant (FR) technology to meet ASTM F1506. The fire-resistant outer shell and lining are made of 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments and meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E. Arc-rated; ATPV rating of 20 cal/cm2. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug. Small pockets by the ears are designed to hold hand warmers.

ergodyne® Skullerz® 8975V Class C Safety Helmet with 8991 Visor Kit Class C (Conductive) helmet features a unique, vented shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. Adjustable exterior venting keeps your head cool (when open) or warm and dry (when closed). A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8. Included easy-mount visor features a UV-protective, scratch-resistant z87 lens and Fog-Off technology.

ergodyne® Skullerz 8972LED Class C Hard Hat Cap Style with LED Light This Class C hard had with LED light is heavy-duty, yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This cap-style brim can be worn backwards to improve upward visibility or forward to keep sun and rain away from the eyes. The open frame design in combination with the adjustable venting offers the best of both worlds: a cooler hard hat in the heat and a dry hard hat in the rain. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off.

ergodyne® Skullerz 8970 Class E Hard Hat Cap Style This Class E hard hat is heavy-duty yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This cap-style hard hat can be worn backwards to improve upward visibility or forward to keep sun and rain away from the eyes. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off. Built with weight distribution in mind, this hard hat's snug fit balances perfectly on the head and doesn't slip off.

ergodyne® Skullerz 8973 Class C Hard Hat Full Brim The Class C full brim hard hat is heavy-duty yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This full-brim style helps keeps rain away from the eyes and provides extra protection against falling or flying debris. Also offers all-around protection from the sun, humidity and heat. The open frame design with the adjustable venting offers a cooler hard hat in the heat and a dry hard hat in the rain. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size and balance with the easy-to-adjust 4-point premium ratcheting suspension.

ergodyne® Skullerz 8973LED Class C Hard Hat Full Brim with LED Light The Class C full brim hard hat and LED light is heavy-duty, yet lightweight and comfortable head protection built to protect the top of the head from falling objects or bumping into stationary objects. A padded, moisture-wicking and odor-resistant sweatband and top pad lines the sides, forehead and top interior and is removable for easy replacement. This full-brim style helps keeps rain away from the eyes and provides extra protection against falling or flying debris. Also offers all-around protection from the sun, humidity and heat. The open frame design with the adjustable venting offers a cooler hard hat in the heat and a dry hard hat in the rain. This safety helmet fits hat sizes 6.5 to 8 (21 in to 25 in). Customize the size with the easy-to-adjust 4-point premium ratcheting suspension. Simply turn the one-handed adjustment knob to tighten or loosen the fit without having to take the hard hat off.

ergodyne® Chill-Its 6615 High-Performance Bandana Doo Rag with Terry Cloth Sweatband The high-performance bandana doo rag with terry cloth sweatband is made with Hi Cool moisture-wicking technology to keep workers comfortably cool and dry on hot days. The Hi Cool performance fabric wicks moisture for quick-drying, while the absorbent terry cloth sweatband prevents sweat from dripping into eyes. This low-profile cooling doo rag can be worn alone or under a hard hat. One size fits most, the back features an elastic band that stretches to comfortably fit a variety of head sizes. To be worn correctly, the three pieces of fabric should also be tied in a knot. Machine wash as needed and hang to dry. Ideal for construction, landscaping, roofing or anyone working in the heat. It is also a great bandana headband for running, hiking and other recreational activities.

ergodyne® N-Ferno 6862 2-Layer FR Shoulder Winter Liner Winter hard hat liner has two layers of insulation with a fire-resistant (FR) modacrylic/cotton blend shell and a comfortable polyester fleece lining for exceptional warmth. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant. The fire-resistant outer shell is made 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments with inherent flame resistance and self-extinguishing properties. The 100% polyester fleece lining is soft to the touch for a comfortable all-day fit. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug. Small pockets by the ears are designed to hold hand warmers.

ergodyne® Chill-Its 8936 Lightweight Mesh Paneling Ranger Hat Provides lightweight, breathable head and face shade for working in the sun. This sun hat is rated to UPF 50+ for protection from harmful UV rays and features a wide brim that can be worn down or snapped up and out of the way. Mesh side vents maximize airflow, and a moisture-wicking sweatband keeps sweat out of eyes to keep workers cool and comfortable. Includes breakaway drawstring chin cord and adjustable cinch cord in back for a custom, secure fit. This sun protection hat fits a variety of face and head sizes. Ideal for those working in hot environments where shade is needed, including agriculture and landscaping. Can also be used for outdoor recreation such as hiking, fishing or gardening.

ergodyne® GloWear 8005 Hi-Vis Hard Hat Neck Shade The hi-vis neck shade stretches around hard hat brims to provide breathable neck and ear protection from sun damage. Made with ANSI 107-approved polyester mesh and reflective, it enhances worker safety and visibility when worn as an accessory with other hi-vis clothing. The elastic design of this hard hat neck shade stretches to fit most standard and full brim hard hats and safety helmets, with additional plastic clips on the inside for stay-in-place security. This high-visibility neck shade is ideal for those wearing head protection while working in road construction, transportation, municipalities and more.

ergodyne® Skullerz® 8974LED Class E Safety Helmet with 8981 Universal LED Headlamp Class E (Electrical) features a dielectric shell and a flexible, open-frame, six-point suspension system for heavy-duty, yet lightweight and comfortable, all-over-head protection. A low-profile brim helps improve visibility, and an included Skullerz Hard Hat LED Headlamp helps illuminate your way. Integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

ergodyne® GloWear 8931 Reflective Stretch-Fit Hat This hat is made with bright fluorescent lime fabric and reflective accents to boost visibility on busy job sites and in low-light conditions. This lightweight cotton-polyester hat is not stiff or bulky, and also features breathable mesh side and back panels for maximum airflow. It is designed with a soft and flexible stretch-fit elastic band for a snug but comfortable fit. This bright lime baseball hat is ideal for those working in road construction, transportation, baggage handling, municipalities or around moving vehicles. It's also great for outdoor recreational activities where you need to be seen, such as running or biking.

ergodyne® N-Ferno 6811Z Rib Knit Hat with Zipper for Bump Cap Insert Zippered rib knit beanie hat provides warmth, as well as the option for lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear this soft cuffed beanie alone or open the back zippered compartment to add the Skullerz 8945 Universal Bump Cap Insert (sold separately) for work in cramped spaces. Made with 100% soft dry acrylic and 40-gram 3M flex stretch insulation for a warm, comfortable fit.

ergodyne® N-Ferno 6842 2-Layer Poly Shoulder Winter Liner Winter hard hat liner features two layers of insulation, with a water-resistant shell and soft polyester fleece lining for comfortable warmth. This lightweight shoulder-length thermal liner is extra long to keep head, ears and neck covered while fitting comfortably under helmets or hard hats without bulk. The PU-coated polyester shell is water-resistant with a durable finish that resists corrosion and abrasion. The 100% polyester fleece lining is incredibly soft for comfortable all-day wear. A hook and loop chin strap comfortably secures this winter liner, while four exterior hook and loop straps securely attach to hard hat suspensions for warmth on the jobsite. An elastic rim on the forehead keeps the liner snug to trap heat and keep cold out. This winter liner is ideal for those requiring head protection.

ergodyne® N-Ferno 6806 Cuffed Rib Knit Winter Hat Hat is designed for warmth, comfort and style. Made with 100% stretchable and soft rib knit acrylic for a snug cozy fit that keeps cold out, plus a 3-inch folding cuff for added warmth around the ears. A reflective logo patch enhances visibility to keep wearers safe and seen. This winter hat is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® Skullerz® 8981 Hard Hat LED Light This hard hat light easily attaches directly to any Skullerz® Hard Hat or Safety Helmet light mount. It simply slides and clips into the front or rear built-in mounts without the need for clunky straps or clamps. This portable headlamp features a built-in magnet on the back for securely attaching the light to metal on the worksite or for storing when not attached to a hard hat or helmet.

ergodyne® Skullerz® 8974-MIPS Class E Safety Helmet with MIPS® Technology Class E (Electrical) features the MIPS® Elevate Safety-Suspension System to increase all-over head protection by reducing the rotation effects associated with dangerous angled impacts, while providing additional side-impact protection along with excellent top-, front- and back-impact protection. A low-profile brim helps improve visibility, and an integrated chin strap secures the helmet in place. One-size-fits-most: accommodates hat sizes 6.5 through 8.

ergodyne® N-Ferno 6867 3-Layer Quilted Shoulder Winter Liner Winter hard hat liner has three layers of insulation with a quilted polyester shell, a foam mid-layer and a thermal polyester fleece lining. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug against the face to trap body heat in and keep cold out. Small pockets by the ears are designed to hold regular-sized hand warmers (sold separately).

ergodyne® Chill-Its 6717CT Cooling Hard Hat Pad and Neck Shade - PVA This evaporative cooling liner pad with neck shade straps into hard hats to deliver up to four hours of cooling relief while also shading the neck from sun damage. The low-profile and lightweight pad with shade features advanced PVA cooling technology for instant cooling without bulk or slime, making it comfortable to wear under hard hats. The wide panel shade extends down for complete back-of-neck-coverage. This hard hat liner pad fits most hard hats and safety helmets, easily attaching to the suspension with two hook and loop straps.

ergodyne® N-Ferno 6822 Balaclava Spandex Top Face Mask Designed with a lightweight spandex top and a stretchable fleece body to comfortably fit under hard hats and helmets with less bulk. Soft fleece traps body heat for warmth when working in the cold. Spandex top is ultra-stretchable and breathable. The longer length adds extra coverage and can be tucked into a jacket to keep your head and neck warm. Reflective accents offer visibility at night or in low-light conditions. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This winter face mask is perfect for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports.

ergodyne® N-Ferno 6893ZI Balaclava + Bump Cap Insert The balaclava face mask with bump cap insert provides warmth for extreme cold, as well as lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear alone as a balaclava face mask or open the top zippered compartment to add the Skullerz 8945 Universal Bump Cap Insert (included) for work in cramped spaces. This winter liner is made of stretchable polyester fleece for a comfortable snug fit that traps heat, plus a long length design that easily tucks into jackets for wind protection in extreme cold. A reflective accent keeps workers safe and seen. When worn without the bump cap insert, it makes for a great thermal layer under hard hats or helmets. The impact-resistant shell is made of lightweight durable polypropylene and is designed with maximum ventilation. An interior foam pad reduces impact but does not absorb odors for fresh all-day wear.

ergodyne® GloWear 8930 Hi-Vis Baseball Cap This baseball cap is made of a lightweight ANSI 107-approved 150D fluorescent Oxford polyester with mesh venting panels for breathable comfort. This hi-vis hat features a reflective logo and 0.25 reflective trim around the cap and brim for enhanced low-light visibility. When worn as an accessory with hi-vis clothing, this hat will enhance worker safety and visibility. This high visibility baseball hat is ideal for those working in road construction, transportation, baggage handling, municipalities or around moving vehicles. It's also great for outdoor recreational activities where you need to be seen, such as running or biking.

ergodyne® N-Ferno 6802ZI Zipper Trapper Hat + Universal Bump Cap This trapper hat with bump cap insert provides warmth from extreme cold, as well as lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear alone as a classic aviator hat or open the top zippered compartment to add the 8945 Universal Bump Cap Insert (included) for work in cramped spaces. The hat features a windproof and water-resistant oxford nylon shell lined with 40 grams of 3M Thinsulate™ Insulation for comfortable warmth in extreme conditions. A water-resistant crown lining prevents sweat or moisture from being absorbed into the lining to keep you dry and warm. Ear flaps can be buttoned up for improved hearing through the small ear holes or down for increased warmth. A chin strap with YKK buckle makes for an adjustable fit, and a reflective accent on the back keeps workers safe and seen.

ergodyne® Chill-Its 6630 High-Performance Terry Cloth Skull Cap Low-profile cap features a wide, absorbent terry cloth sweatband to manage perspiration away from your eyes, face and glasses. The Hi Cool moisture management performance fabric is stretchy enough to fit most heads and can be worn under a hard hat or on its own to provide sun-blocking protection. The low-profile design fits comfortably under a hard hat or helmet and is great for construction workers, landscaping, roofing, or anybody working in the heat. Can also be used to reduce the risk of heat stress while mountain biking, motorcycling, gardening, hiking, playing sports and more.

ergodyne® Chill-Its 6710CT Cooling PVA Tie Bandana Triangle Hat Advanced PVA material keeps you cool without the bulk and activates easily and quickly when run under water for one minute. Re-usable, just re-wet to re-activate. Tie closure maintains a snug, adjustable fit.

ergodyne® Chill-Its 6715CT Hard Hat Cooling Pad - PVA The evaporative cooling pad straps into hard hats to deliver four hours of cooling relief. The low-profile and lightweight liner pad features advanced PVA (polyvinyl alcohol) cooling technology for instant cooling without bulk or slime, making it comfortable to wear under hard hats. This hard hat liner pad fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook and loop straps.

ergodyne® N-Ferno 6811ZI Rib Knit Hat + Bump Cap Insert This rib knit hat with bump cap insert provides warmth, as well as lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear this soft cuffed beanie alone or open the back zippered compartment to add the Skullerz 8945 Universal Bump Cap Insert (included) for work in cramped spaces. Made with 100% soft dry acrylic and 40-gram 3M flex stretch insulation for a warm, comfortable fit. The impact-resistant shell is made of lightweight durable polypropylene and is designed with maximum ventilation for breathable airflow that doesn't compromise protection. An interior foam pad reduces impact but does not absorb odors for fresh all-day wear. Bump caps are typically worn in spaces where worker-generated impact head protection is needed, like low ceilings, beams, low pipes and other bump hazards.

ergodyne® Skullerz® 8987 Rechargeable Hard Hat LED Light This rechargeable hard hat light easily attaches directly to any Skullerz® Hard Hat or Safety Helmet light mount. It simply slides and clips into the front or rear built-in mounts without the need for clunky straps or clamps. This portable headlamp features a built-in magnet on the back for securely attaching the light to metal on the worksite or for storing when not attached to a hard hat or helmet.

ergodyne® GloWear 8935 Hi-Vis Ranger Sun Hat This sun hat is a lightweight and breathable sun protection hat for face and head shade while working outdoors. This 150D polyester sun hat features a wide brim for complete coverage, while 360° mesh venting maximizes airflow for breathable comfort. The hi-vis color and 1 reflective tape are ANSI 107-approved to keep workers safe and seen. Machine wash as needed and hang to dry. Ideal for those working in hot environments where shade and cooling is needed, including agriculture and landscaping. Can also be used for outdoor recreation such as hiking, fishing or gardening.

ergodyne® N-Ferno 6810 Half Style Stretch Cap Stretch cap keeps ears and head protected from wind and cool conditions.

ergodyne® GloWear 8006 Hi-Vis Hard Hat Neck Shade The hi-vis neck shade straps into hard hats to provide full back-of-neck protection from sun damage. Made with ANSI 107-approved polyester fabric and reflective trim, it enhances worker safety and visibility when worn as an accessory with other hi-vis clothing. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook and loop closures. This high-visibility neck shade is deal for those wearing head protection while working in road construction, transportation, municipalities and more.

ergodyne® Skullerz 8968 Class C Lightweight Full Brim Hard Hat with Adjustable Venting The 6-point suspension provides lightweight yet durable protection to shield the top of the head from falling objects or bumping into stationary objects. This vented hard hat features a lightweight HDPE plastic shell for comfort without comprised protection.

ergodyne® Chill-Its 6483 Cooling Neck Gaiter Bandana Pocket Cooling neck gaiter with pocket protects workers from sun, dust and debris while also providing cool relief on hot days. When wet, the evaporative cooling technology will instantly activate for hours of cooling. When dry, the material will absorb sweat and wick moisture. For advanced cooling along the neck, this neck gaiter features a reinforced back pocket designed to hold ice or phase change packs (not included). It is rated to UPF 50+ for protection against the sun's harmful UV rays, and also features a reflective accent for enhanced visibility. With a bandana cut, this gaiter is longer in the front than back. When pulled up for wear as a face covering, the adjustable nose clip along the top makes for a comfortable and secure fit while also reducing eyewear fogging. A gathered elastic seam along the back reduces the gap between the neck and gaiter for a snug, comfortable fit.

ergodyne® N-Ferno 6812 Rib Knit Beanie A cool weather essential featuring stretchable ribbed knit fabric that fits snug to keep heat close when the temperature drops. It's the perfect knit hat to comfortably layer underneath a helmet or a hood for cool-to-cold conditions. Be ready for any outdoor excursion with this classic knit cap sized to fit most noggins small and large. It measures 9.25 high x 8.5 wide and is machine washable. Wear this stylish beanie as a year-round accessory with comfort you can count on and a classic look for all seasons. Whether you're hitting the mountain, shoveling your driveway or working in cold climates.

ergodyne® N-Ferno 6818 Knit Winter Hat Fleece Lined Made with 3M™ Thinsulate™ insulation and a soft fleece liner for comfortable warmth. The 100% stretchable Dralon acrylic shell makes for a snug, cozy fit that keeps cold out. Low-profile for wear alone or under hard hats. This winter hat is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® N-Ferno 6823 Hinged Balaclava Face Mask Features a hinged design for versatile protection from cold, wind and snow. Depending on weather or fit preference, adjust for wear as a full-face mask, neck gaiter or face shield. Stretchable fleece makes for a snug, comfortable fit that keeps cold out. Wind-resistant paneling over the face provides extra protection against harsh wind, while mesh paneling over the mouth allows wearers to breathe easily. This long length balaclava provides full head and neck coverage and easily tucks into jackets to seal in warmth. The low-profile design can be worn alone or under hard hats or helmets. Featuring reflective accents to keep wearers safe and seen. This winter face mask is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® Chill-Its 6700CT Cooling Bandana PVA Tie Headband Features advanced PVA cooling technology for relief in extreme heat. Lightweight and low-profile, this bandana is perfect for wear around the neck or under hard hats. A tie closure in the back makes for an adjustable, snug fit on a variety of head sizes. Heat-related illness continuously ranks among the top causes of worksite accidents and fatalities. Evaporative cooling technologies such as PVA (polyvinyl alcohol) are a simple, effective and comfortable solution for heat stress prevention. Similar to how sweat cools the body, evaporative technologies use an external water source to draw heat away-helping to regulate body temperature while providing cool relief. When activated, this PVA cooling bandana is comfortable and refreshing for even the hottest days of the year.

ergodyne® N-Ferno 6491 Reversible Thermal Fleece + Poly Multi-Band Reversible thermal multi-band offers multifunctional head, face and neck protection from cold, wind, sun, dust and debris. A reversible, dual-material design gives this multi-band two-in-one functionality and style. When worn with the soft fleece against the skin, it provides added warmth and comfort in cold temperatures. When worn with the moisture-wicking polyester against the skin, it absorbs sweat to keep the wearer dry. This winter headwear and face protection is incredibly versatile. Regardless of which side is facing outward, the stretchable polyester enables it to be worn as a neck gaiter, face mask or face covering, head covering, hat, dew rag and more. One size fits most, this thermal multi-band is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® Chill-Its 6702 Cooling Embedded Polymers Tie Bandana An evaporative cooling headband designed to deliver instant cooling relief lasting up to four hours. This lightweight bandana is designed with polymer crystal technology embedded in a batting material for fast cooling. Embedding the polymer crystals reduces uneven expansion of the polymers when wet (less bulk, more comfort). Use the tie-closure to adjust the fit around the head, neck or wrists. Simply soak the cooling headwear in water for 2 to 5 minutes to activate. The water-absorbing polymer crystals inside will plump up slightly and provide a cooling sensation that lasts for hours. The new woven batting material will not become overly saturated and will not ooze or become slimy. Simply flip the cooling bandana over to refresh the cooling sensation. No ice or refrigeration is needed. Hang dry and rewet to activate. Great for construction, landscaping, roofing, or anybody working in the heat.

ergodyne® N-Ferno 6885 2-Layer FR Zip-Off Winter Liner Winter hard hat liner provides warm fire-resistant (FR) protection for those working in cold environments where arc flash is a risk. Made with two layers of FR modacrylic-cotton twill blend for enhanced warmth and comfort. This lightweight shoulder-length thermal liner is extra-long to keep head, ears and neck covered while fitting comfortably under helmets or hard hats without bulk. The unique zip-off cap design allows workers to remove the bottom part of the liner for wear alone as a thermal FR skull cap. It can also be buttoned atop hard hats to keep the bottom up and out of the way. To attach to a hard hat, remove the suspension and thread the system through the four slots in the liner. Then, secure the four hook and loop points to the suspension before inserting back into the hard hat. You can also unzip the lower neck cover for wear as a standalone FR cap.

ergodyne® Skullerz 8999 Mesh Face Shield Replacement for Hard Hat & Safety Helmet This mesh face shield replacement is designed to securely attach to Skullerz 8996 Face Shield Adapter Frame or as a replacement shield for the 8989 Hard Hat Mesh Face Shield. This metal mesh face shield protects against flying debris while also permitting airflow for increased comfort and easily installs with the face shield adapter (sold separately).

ergodyne® Chill-Its 8935MF Hi-Vis Microfiber Ranger Sun Hat A lightweight and breathable sun protection hat with advanced microfiber cooling technology lining the rim for relief in extreme heat. This 150D polyester sun hat is rated to UPF 50+ and features a wide brim for complete face and head coverage, while 360-degree mesh venting maximizes airflow for breathable comfort. The hi-vis colors and 1" reflective tape are ANSI 107-approved to keep workers safe and seen. Evaporative cooling technologies such as microfiber are a simple, effective and comfortable solution for heat stress prevention. Evaporative technologies use an external water source to draw heat away helping to regulate body temperature while providing cool relief. Run the inside rim of the sun hat under water for one minute to activate instant cooling relief that lasts up to three hours. The ultra-absorbent microfiber will retain water while remaining soft and comfortable.

ergodyne® Chill-Its 6710 Cooling Embedded Polymers Tie Bandana Triangle Hat Activated polymers bring cooling power where you need it most. Activate by soaking in water for 2 to 5 minutes. Re-usable, just soak in water to re-activate. Tie closure maintains a snug, adjustable fit.

ergodyne® N-Ferno 6892 3-Layer FR Cotton Shoulder Winter Liner Winter hard hat liner has 3 layers of insulation for extreme warmth. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. The fire-resistant outer shell and lining are made of 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments and meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E. Arc-rated; ATPV rating of 27 cal/cm2. A mid-layer of 3M FR Thinsulate provides maximum warmth and protection in extremely cold environments. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments.

ergodyne® N-Ferno 6828 Modacrylic Blend FR Fleece Balaclava Face Mask Made with stretchable modacrylic fleece for fire-resistant protection and warmth. This fire-resistant face mask meets requirements of Performance Specification ASTM F1506; classified CAT 2 according to NFPA 70E. ARC Rated; ATPV of 10.6 cal/cm2; and meets performance requirements of EN 1149, antistatic. Stretchable warm modacrylic cotton fleece construction fits comfortably under a helmet or hard hat, making it the perfect winter gear for working in ARC applications. Reflective accents offer visibility at night or in low-light conditions. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. Ideal for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports.

ergodyne® Chill-Its 6632 Performance Knit Cooling Skull Cap Low-profile cap wicks away moisture when worn dry and provides evaporative cooling relief when worn wet. Designed with stretchy performance knit fabric to provide UPF 50+ sun protection against harmful UV rays. An elastic band lines the interior for a snug and comfortable fit. In order to activate, just soak in water until saturated, then wring out excess water. The evaporative cooling process begins instantly and lasts for hours. If wearing dry, the moisture-wicking fabric draws perspiration away to help keep you dry. Anti-odor treatment keeps this cooling headwear fresh, while reflective accents ensure workers are seen in low-light conditions. The low-profile design fits comfortably under a hard hat or helmet and is great for construction workers, landscaping, roofing, or anybody working in the heat. It can also be used to reduce the risk of heat stress while mountain biking, motorcycling, gardening, hiking, playing sports and more.

ergodyne® Skullerz 8979 Headband Light Mount with Silicone Strap This headband light mount with silicone strap works with all Skullerz Headlamps (8978, 8981, 8987, 8993) to provide hands-free lighting with hard hats, safety helmets or hard-shell bump caps. Made with rubberized silicone, this non-slip strap will not slide around on hard or smooth surfaces. Hard hat lights and headlamps sold separately.

ergodyne® N-Ferno 6802 Classic Trapper Hat Hat is made with durable windproof and water-resistant nylon to keep you warm and dry in even the most extreme temperatures. Wear it with the ear flaps up or down to completely cover your ears. Even the worst blizzards don't stand a chance against this aviator hat. Lined with 60 grams of 3M Thinsulate Insulation for comfortable warmth in the cold. The water-resistant crown lining prevents sweat or moisture from being absorbed into the lining, keeping you warmer. The ear flaps feature smaller ear holes on each side for improved hearing when wearing the flaps up. Button the smaller flaps down for even more warmth.

ergodyne® N-Ferno 6820 FR Cotton Fleece Knit Hat Provides warm fire-resistant protection for those working in cold environments where arc flash is a risk. Our highest rated flame-resistant product, this self-extinguishing winter hat keeps workers safe. A modacrylic and cotton-blend shell provides a comfortable and snug fit that keeps the cold air out. The 40% cotton and fleece lining adds softness and warmth for optimum comfort. Machine washable, this durable thermal hat is designed to withstand wear and tear. The inherent flame-resistant material won't reduce after multiple washes. Wear the skull cap hat alone or under a hard hat for added warmth. A reflective accent keeps wearers safe and seen. This one-size-fits-most winter hat is ideal for those working in environments where arc flash can occur—including electrical, manufacturing and construction work. Also great for weekend recreation such as hunting, skiing or climbing.

ergodyne® N-Ferno 6871 2-Layer Winter Liner + Mouthpiece Kit The liner with mouthpiece kit includes a winter hard hat liner with two layers of insulation and a thermal mouthpiece attachment for full-face coverage. The lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. Both the hard hat thermal liner and the thermal mouthpiece have a breathable 100% cotton twill outer shell and a soft 100% polyester fleece lining for added comfort and to stand up to tough environments. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner contains pockets by the ears designed to hold regular-sized hand warmers (sold separately) to keep ears warm and comfortable in extreme temperatures.

ergodyne® Chill-Its 6705 Cooling Embedded Polymers Hook & Loop Bandana Headband Activated polymers bring cooling power where you need it most in this evaporative cooling bandana. Hook and loop closure maintains a snug fit. Soak in water 2 to 5 minutes to activate. Remains hydrated for up to four hours. Re-usable, just re-wet.

ergodyne® N-Ferno 6813 Winter Skull Cap Helmet Liner This winter skull cap helmet liner is lightweight and breathable for warm comfort in mild to cold conditions. Designed to fully cover the head and ears, this low-bulk thermal skull cap can be comfortably worn on its own or beneath helmets and hard hats. With a brushed thermal interior and durable pill-resistant exterior, this winter beanie is made for long-lasting wear.

ergodyne® N-Ferno 6852 2-Layer Cotton Shoulder Winter Liner Winter hard hat liner has two layers of insulation with a cotton shell and a comfortable polyester fleece lining for exceptional warmth. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. The outer shell is made with 100% cotton twill to stand up to tough environments. The 100% polyester fleece lining is soft to the touch for a comfortable all-day fit. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug against the face to trap body heat in and keep cold out. Small pockets by the ears are designed to hold regular-sized hand warmers (sold separately) to keep ears warm and comfortable in extreme temperatures.

ergodyne® N-Ferno 6893Z Balaclava with Zipper for Bump Cap Insert Provides warmth for extreme cold, as well as the option for lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear alone as a balaclava face mask or open the top zippered compartment to add the Skullerz 8945 Universal Bump Cap Insert (sold separately) for work in cramped spaces. This winter liner is made of stretchable polyester fleece for a comfortable snug fit that traps heat, plus a long length design that easily tucks into jackets for increased warmth and wind protection in extreme cold. A reflective accent keeps workers safe and seen. When worn without the bump cap insert, it makes for a great thermal layer under hard hats or helmets. Ideal for construction, baggage handling, mechanics, freight, mining, oil and gas, warehousing, refrigeration and more. Also great for outdoor sports like skiing, snowboarding, trekking, mountain climbing and hunting.

ergodyne® Skullerz 8947 Lightweight Baseball Hat and Bump Cap Insert This Lightweight Baseball Hat features the Skullerz 8943F(x) hinged impact-resistant bump cap insert for flexible, breathable protection against bumps, scrapes, bruises and other minor head injuries. This lightweight polyester hat is not stiff or bulky, and also features breathable laser-perforated side and back panels for maximum airflow. Designed with a buckle closure and adjustable rear sizing strap for a custom fit. Reflective accents and piping help ensure workers are seen in low-light conditions. Not bulky like a hard hat, bump caps are typically worn in spaces where worker-generated impact head protection is needed, like low ceilings, beams, low pipes and other bump hazards. They are ideal for mechanics and airline baggage handlers, as well as workers in factories, in-home services and other industries that do not require safety hard hat protection.

ergodyne® N-Ferno 6821 Fleece Balaclava Face Mask Designed with high quality, soft, stretchable fleece for warmth when working in the cold. The heat-trapping fleece is warm without being bulky and will fit comfortably under a hard hat or helmet. The longer length offers extra coverage for your head and neck and can be tucked into your jacket to seal out the cold. Reflective accents add visibility at night or in low light. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This is the perfect warm face mask for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas. Can also be worn for outdoor sports.

ergodyne® N-Ferno 6826 2-Piece Fleece Balaclava Face Mask Made from warm, stretchable fleece to cover your neck, head, and face. The 2-piece construction allows you to wear it in two different ways: detach the ends and wear as either a neck gaiter or a skull cap. The longer length covers your face, nose, mouth and neck for protection against the wind and cold. Reflective accents offer visibility at night or in low-light conditions. Unique hook and loop attachments connect to your hard hat's suspension system to keep it in place. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This winter face mask is perfect for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports.

ergodyne® N-Ferno 6827 2-Piece Fleece Neoprene Balaclava Face Mask Made with stretchable fleece to cover your neck, head, and face, with a neoprene mask over the nose and mouth. The two-piece construction allows you to wear it in two different ways: detach the ends and wear as either a neck gaiter or a skull cap. The face mask is made from 1 mm neoprene with one side nylon and the other side fleece. The small laser-cut holes in the mask allow airflow and prevent glasses from fogging. The longer length covers your face, nose, mouth and neck for protection against the wind and cold. Reflective accents offer visibility at night or in low-light conditions. Unique hook and loop attachments connect to your hard hat's suspension system to keep it in place. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports.

ergodyne® N-Ferno 6860 2-Layer FR Regular Winter Liner Winter hard hat liner has two layers of insulation with a fire-resistant (FR) modacrylic/cotton blend shell and a soft polyester fleece lining for exceptional warmth. This lightweight thermal liner is chin-length to keep head and ears covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant. The fire-resistant outer shell is made 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments with inherent flame resistance and self-extinguishing properties. The 100% polyester fleece lining is soft to the touch for a comfortable all-day fit. A hook and loop chin strap comfortably secures this winter liner, while four exterior hook and loop straps attach to the interior of a hard hat for a secure attachment and added warmth. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug against the face to trap body heat in and keep cold out.

ergodyne® N-Ferno 6844 Dual-Layer Balaclava Face Mask Provides form-fitting comfort and multi-functional protection from extreme weather conditions such as the cold, wind and snow. This balaclava works as a ski mask or a staple on the job to keep you warm and dry so you can focus on the task at hand. A double layer of fabric covers the nose and mouth so you can pull the nylon, spandex outer layer down below your chin to reveal the soft, breathable, mesh bottom layer. This is also convenient for preventing your safety glasses or sunglasses from fogging up. Cover all but your eyes or wear as an open face mask or neck gaiter. This multipurpose balaclava can be worn comfortably under your hard hat or ski helmet. Designed with lightweight, quick-drying and high stretch material to offer maximum protection against the elements in harsh conditions.

ergodyne® N-Ferno 6952 3-Layer Quilter Shoulder Winter Liner Winter hard hat liner features three layers of insulation, with a quilted shell, foam mid-layer and sherpa lining for enhanced warmth and comfort. This lightweight shoulder-length thermal liner is extra long to keep head, ears and neck covered while fitting comfortably under helmets or hard hats without bulk. The quick-drying polyester sherpa lining delivers all the benefits of real sheep's wool to keep wearers warm without bulk or discomfort. Also features a quilted nylon shell. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments. This hard hat winter liner has an elastic strip in the forehead area to keep the liner snug against the face to trap body heat in and keep cold out. Small pockets by the ears are designed to hold regular-sized hand warmers (sold separately) to keep ears warm and comfortable in extreme temperatures.

ergodyne® Chill-Its 6550 Head Terry Cloth Sweatband Thick soft terry keeps perspiration away from eyes and face for safety and productivity. Elastic maintains snug fit.

ergodyne® N-Ferno 6970 Extreme Hot Rox Balaclava Face Mask Technologically advanced high-performance cold weather mask to combat the damaging effects of breathing in cold air. Warm 320 g fleece covers the face, neck and head, while controlling moisture to keep you dry and warm. The built-in, removable heat exchanger warms the air before it gets to your face for easier breathing in extreme cold. The adjustable nose clip prevents eyewear from fogging, and the adjustable face mask is removable with hook-and-loop attachments. Reflective accents offer visibility at night or in low-light conditions. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This winter face mask is perfect for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing, and working in refrigerated areas.

ergodyne® N-Ferno 6870 2-Layer Thermal Mouthpiece The mouthpiece has two layers of insulation with a cotton shell and a polyester fleece liner to provide comfort, warmth and face protection in extremely cold weather work conditions. This thermal winter face mask is made to fit most N-Ferno Winter Liners (sold separately) to double up the warmth on those frigid jobsites. The shell design prevents the mask from being sucked into the mouth for plenty of breathing space and protection from the cold air. The detachable face mask allows you to let in air or remove for speaking when needed. The adjustable hook and loop closures have a secure and adjustable fit to prevent the mask from moving around during any task. Great cold weather work gear for people who spend extended periods of time in cold environments such as construction, freight, drilling or mining, delivery service, landscaping, and warehousing.

ergodyne® N-Ferno 6802Z Zippered Trapper Hat Hat provides warmth from extreme cold, as well as the option for lightweight protection from bumps, scrapes, bruises and other minor head injuries. Wear alone as a classic aviator hat or open the top zippered compartment to add the 8945 Universal Bump Cap Insert (sold separately) for work in cramped spaces. This trapper hat features a windproof and water-resistant oxford nylon shell lined with 40 grams of 3M Thinsulate Insulation for comfortable warmth in extreme conditions. A water-resistant crown lining prevents sweat or moisture from being absorbed into the lining to keep you dry and warm. Ear flaps can be buttoned up for improved hearing through the small ear holes or down for increased warmth. A chin strap with YKK buckle makes for an adjustable fit, and a reflective accent on the back keeps workers safe and seen.

ergodyne® Skullerz 8995 Anti-Scratch & Anti-Fog Hard Hat Face Shield with Adapter for Full Brim Designed to increase eye and face protection for those using Skullerz Cap-Style Hard Hats or Safety Helmets. This face shield protects against flying debris and splashes and features a performance anti-fog and anti-scratch protective lens that will not wash or wear off over time.

ergodyne® N-Ferno 6840 2-Layer Poly Regular Winter Liner Winter hard hat liner features two layers of insulation, with a water-resistant shell and soft polyester fleece lining for comfortable warmth. This lightweight chin-length thermal liner keeps head and ears covered while fitting comfortably under helmets or hard hats without bulk. The PU-coated polyester shell is water-resistant with a durable finish that resists corrosion and abrasion. The 100% polyester fleece lining is incredibly soft for comfortable all-day wear. A hook and loop chin strap comfortably secures this winter liner, while four exterior hook and loop straps securely attach to hard hat suspensions for warmth on the jobsite. An elastic rim on the forehead keeps the liner snug to trap heat and keep cold out.

ergodyne® N-Ferno 6955 Insulated Three-Layer Balaclava Face Mask Features three layers for maximum protection in extreme cold weather environments. Lining is made of Polartec Power Grid™ fleece, a moisture-wicking, grid-construction fabric that delivers enhanced warming while remaining breathable and lightweight. Stretchable polyester-spandex exterior makes for a comfortable fit on a variety of head sizes, and the front ribbed panel features an insulated mid-layer for additional warmth where it's needed most. In addition to protection from the elements, the ribbed design of the three-layer front panel provides a loft that creates a gap between the material and mouth—allowing easier breathability than some single-layer options. Reflective accents enhance visibility at night or in low-light conditions. This versatile insulated balaclava provides the cold-blocking protection of a full face mask, but can also be worn as a neck gaiter or face shield.

ergodyne® N-Ferno 6962 FR Dual Compliant Neck Gaiter Dual compliant to two flame-resistant standards, NFPA 70E and NFPA 2112, for protection against both arc flash and flash fire. Versatile, no-bulk winter gaiter blocks out all the elements to keep you safe and warm in the most demanding conditions. Constructed of Polartec FR Power Grid fleece, a grid-construction knit that minimizes fabric mass and maximizes fabric performance for increased warmth and lighter weight. A hydrophilic interior absorbs sweat and transfers it outside, while the exterior disperses moisture for more efficient evaporation. The grid design also creates open air channels for improved breathability. Versatile, can be worn around the neck or pulled over the mouth, nose and ears. Double-standard fabric is tested and certified to meet both NFPA 70E and NFPA 2112 standards for flame-resistant clothing and has an ARC rating of CAT 2; 20 cal/cm2 ATPV.

ergodyne® N-Ferno 6878 3-Layer Winter Liner + Mouthpiece Kit The kit includes a winter hard hat liner with three layers of extreme insulation and a thermal mouthpiece attachment for full-face coverage. The lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. The line has a 100% polyester quilted outer shell, a mid-layer of foam insulation to provide an additional layer of thermal protection and a soft 100% polyester fleece lining for extremely cold environments. It has a breathable and water-resistant 1 mm neoprene outer shell construction to trap heat in and a soft fleece liner for additional comfort. There are four hook and look straps on the exterior of the liner designed to securely attach to the interior of a hard hat. This detachable face mask design allows you to let in air or remove for speaking when needed.

ergodyne® N-Ferno 6847 FR Dual Compliant Balaclava Face Mask Blocks all the elements: earth, wind, fire, and water. Designed with Polartec FR Power Grid fleece, which is a grid-construction knit that minimizes fabric mass and maximizes fabric performance for increased warmth and lighter weight. The interior is hydrophilic to absorb sweat and transfer it outside, while the exterior disperses moisture for more efficient evaporation. The grid design also creates open air channels for improved breathability. This double-standard fabric is tested and certified to meet both NFPA 70E and NFPA 2112 standards for flame-resistant clothing. Also has an ARC rating of CAT 2; 20 cal/cm2 ATPV. Can be worn alone or under hard hats, ski helmets or other head protection. The moisture-wicking and breathable fabric makes it the perfect fire-resistant face mask for winter work where fire-resistant clothing is required.

3M™ SecureFit™ Hard Hat with Uvicator Suspension system incorporates exclusive patented SecureFit™ Pressure Diffusion Technology. Comfort pad on back of suspension is designed to distribute force and increase ease of wear. Customize your fit with multiple levels of height and head-shape adjustments. Premium washable and replaceable sweatband with moisture-wicking material is designed to help keep workers cool and dry. Uvicator sensor lets wearers know when to replace hard hat due to UV exposure.

3M™ SecureFit™ H-Series Hard Hats Get an excellent blend of comfort, style and safety with SecureFit™ H-Series hard hats. Low-sitting suspension system incorporates exclusive, patented Pressure Diffusion Technology, which self-adjusts to the wearer as the smooth, easy-turning ratchet is tightened. Multiple levels of height and head-shape adjustments allow the wearer to customize the fit even further.

ergodyne® N-Ferno 6874 2-Layer Thermal Mouthpiece This thermal mouthpiece has two layers of insulation with a neoprene shell and a fleece liner to provide comfort, warmth and face protection in extremely cold weather work conditions. It's made to fit most N-Ferno Winter Liners (sold separately) to double up the warmth on those extra-frigid jobsites. The water-resistant, 1 mm neoprene is warm and breathable while remaining soft and stretchy for a close, heat-trapping fit. Polyester fleece lines the inside of the mouthpiece for comfort against the skin, long wear and optimal breathability. Shell design prevents the mask from being sucked into the mouth for plenty of breathing space and protection from the cold air. The detachable face mask allows you to let in air or remove for speaking when needed. The adjustable hook and loop closure have a secure and adjustable fit to prevent the mask from moving around during any task.

ergodyne® Chill-Its 6487R Reflective Cooling Multi-Band Reflective cooling multi-band protects workers from sun, dust and debris while also enhancing visibility and providing cool relief on hot days. When wet, the evaporative cooling technology will instantly activate for hours of cooling. When dry, the material will absorb sweat and wick moisture. It is also rated to UPF 50+ for protection against the sun's harmful UV rays. Unique to this cooling neck gaiter are segmented reflective stripes, strategically placed on the back of the neck where the worker cannot see. Combined with the hi-vis color, it boosts visibility to keep workers safe and seen day and night. The segmented design makes sure the reflective does not interfere with the multi-band's flexibility for comfortable wear in a variety of ways.

ergodyne® N-Ferno 6803 Reflective Rib Knit Winter Hat The N-Ferno 6803 Reflective Rib Knit Winter Hat is designed for warmth, comfort and style. Made with 100% stretchable and soft rib knit acrylic for a snug cozy fit that keeps cold out, plus a 3" folding cuff for added warmth around the ears.

ergodyne® N-Ferno 6876 2-Layer FR Liner + Mouthpiece Kit The kit includes a winter hard hat liner with two layers of insulation and flame-resistant technology plus a thermal mouthpiece attachment for full-face coverage. The lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. Both thermal liner and mouthpiece have a fire-resistant outer shell and lining made of 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments and meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E. Arc-rated; ATPV rating of 20 cal/cm2. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments.

ergodyne® Chill-Its 6661 Universal Hard Hat Brim with Neck Shade The universal hard hat brim with neck shade attaches to hard hats and safety helmets to shade the face and neck for protection against sun damage. This flexible full brim shade features a silicone-lined elastic interior to securely grip and attach to most hard hats and safety helmets.

ergodyne® N-Ferno 6872 2-Layer FR Mouthpiece This mouthpiece has two layers of insulation with a modacrylic/cotton blend shell and liner to provide comfort, warmth and face protection in extremely cold weather work conditions. This thermal winter face mask is made to fit N-Ferno Winter Liners (sold separately) to double up the warmth on those frigid jobsites. Flame-resistant rated materials meet ASTM F1506 and are classified to CAT 2 according to NFPA 70E. The shell design prevents the mask from being sucked into the mouth for plenty of breathing space and protection from the cold air. The detachable face mask allows you to let in air or remove for speaking when needed. The adjustable hook and loop closure have a secure and adjustable fit to prevent the mask from moving around during any task. Great cold weather work gear for people who spend extended periods of time in cold environments and need such as construction, freight, drilling or mining, delivery service, landscaping, and warehousing.

ergodyne® Skullerz 8951 Vented Hard Shell Bump Cap Crafted with a durable polyethylene shell and engineered to guard against bumps, scrapes, bruises and other minor head injuries. The material not only resists cracking and breaking but also simplifies cleaning for added convenience. Strategically placed shell vents and a ventilated suspension system enhances overall breathability and air circulation, making it an ideal choice for all-day use. The suspension is flexible in design and incorporates a removable, replaceable 4 mm thick foam-backed fabric sweatband to help keep users cool and comfortable even during the most demanding tasks. The recessed design on the sides ensures a comfortable fit with earmuffs for improved integration with hearing protection. The short, flat angled brim design enhances upward visibility. Achieving the perfect fit is easy with the adjustable suspension system. You can customize height, rear strap angle and size to your personal preference, ensuring comfort and security. Typically worn in tight spaces where protection from lower energy worker-generated impacts can occur such as low ceilings, beams, low pipes and other bump hazards, bump caps are not as heavy and bulky as more protective hard hats and safety helmets. They are ideal for mechanics and airline baggage handlers, as well as workers in food processing/manufacturing facilities, in-home services like inspection and install, pest control and other industries that do not require hard hat protection. Not for use where ANSI/ISEA Z89.1-2014 hard hats are required.

ergodyne® N-Ferno 6877 3-Layer FR Winter Liner Winter hard hat liner has three layers of insulation with an fire-resistant (FR) modacrylic/cotton blend shell, a foam mid-layer and a comfortable polyester fleece lining for extreme warmth. This lightweight thermal liner is shoulder-length to keep head, ears and neck covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant. The fire-resistant outer shell is made 60% modacrylic cotton and 40% cotton twill blend to stand up to tough environments with inherent flame resistance and self-extinguishing properties. Foam insulation provides an additional layer of thermal protection for extremely cold environments. The 100% polyester fleece lining is soft to the touch for a comfortable all-day fit. There are four hook and loop straps on the exterior of the liner designed to securely attach to the interior of a hard hat for versatile protection in extreme work environments.

ergodyne® N-Ferno 6960 Fleece Neck Gaiter Provides warm, no-bulk protection from the most demanding winter conditions. Wear alone or as a layering option with hats, caps or winter liners for added warmth. Made from a four-way stretchable, breathable fleece for comfort and lightweight warmth. A gathered elastic seam in the back ensures a custom, snug fit that keeps heat in and cold out. It is designed with an angled bottom to minimize bulk while layering and is long enough to tuck into a jacket for secure protection that won't ride up. Versatile fleece gaiter can be worn around the neck or pulled over the mouth, nose and ears. One size fits most, this winter neck gaiter is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® N-Ferno 6887 2-Layer Winter Headband This two layer, fleece-spandex headband provides bulk-free warmth in mild to extreme winter conditions. The interior is lined with a heat-trapping, grid polyester fleece for breathable thermal protection. The outer layer is made from a stretchable spandex/polyester blend that provides added protection while maintaining a flexible, comfortable fit for most head sizes. With a contoured shape, it provides full coverage for both the ears and forehead. The low-profile design can be worn alone or under a hard hat. Reflective accents on the back keep wearers safe and seen. It is ideal for those working in construction, transportation, warehousing, refrigerated areas and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® N-Ferno 6961 Reflective Winter Neck Gaiter This neck gaiter with reflective accents provides warm, no-bulk protection from demanding winter conditions while also enhancing visibility in low-light environments. The 100% stretchable acrylic shell with a soft liner makes for a snug, cozy fit that keeps cold out. Low-profile for wear alone or under hard hats.

ergodyne® Skullerz 8941 Mesh Dreadlock Tube and Bump Cap Insert This mesh dreadlock tube features the Skullerz 8943F(X) hinged impact-resistant bump cap insert for flexible, breathable protection against bumps, scrapes, bruises and other minor head injuries. Designed with larger heads and hairstyles in mind, it offers an enhanced, flexible and non-bulky fit. Lightweight and low-profile polyester mesh is breathable and stretchy to fit most head sizes, specifically designed to allow hair to escape to the rear of the worker's head. The moisture-wicking fabric draws perspiration away to help keep you dry and fresh during all-day use. Not bulky like a hard hat, bump caps are typically worn in spaces where worker-generated impact head protection is needed, like low ceilings, beams, low pipes and other bump hazards. They are ideal for mechanics and airline baggage handlers, as well as workers in factories, in-home services and other industries that do not require safety hard hat protection.

ergodyne® Skullerz 8946 Baseball Cap This baseball cap is designed to integrate with the best-selling Skullerz 8945 Universal Bump Cap Insert (not included) for use on worksites where hard hats aren't required, but added head impact protection is still needed to shield against bumps, scrapes, bruises and other minor head injuries. This baseball cap provides a never-before-seen combination of form and function. In addition to the bump cap-compatibility, the hat features reflective brim piping for added visibility, a one-size-fits-most adjustable hook and loop closure and a mesh back half for breathability. Worn alone, this baseball hat is a stylish option for everyday wear.

ergodyne® Chill-Its 6482 Cooling Neck Gaiter Bandana Pocket Kit Cooling neck gaiter with pocket protects workers from sun, dust and debris while also providing cool relief on hot days. When wet, the evaporative cooling technology will instantly activate for hours of cooling. When dry, the material will absorb sweat and wick moisture. For advanced cooling along the neck, this neck gaiter features a reinforced back pocket designed to hold the Chill-Its 6283 Rechargeable Phase Change Ice Pack (included). It is rated to UPF 50+ for protection against the sun's harmful UV rays, and also features a reflective accent for enhanced visibility. With a bandana cut, this gaiter is longer in the front than back. When pulled up for wear as a face covering, the adjustable nose clip along the top makes for a comfortable and secure fit while also reducing eyewear fogging. A gathered elastic seam along the back reduces the gap between the neck and gaiter for a snug, comfortable fit.

ergodyne® Chill-Its 6485 Multi-Band Multi-band offers head and face protection from the sun, dust and flying debris. Plus, it features moisture-wicking technology to absorb sweat and wick moisture away. This multi-band features supremely versatile performance fabric with a multitude of uses and ways to wear. This PPE safety headwear is incredibly versatile. The soft, stretchable knit material allows the multi-band to be worn as a cooling headband, neck gaiter, face mask or face covering, hat, dew rag and more. It can also be worn under a hard hat to wick moisture on hot days. Anti-Odor treatment keeps it fresh all day long. Hang dry or machine wash as needed. Great for construction, landscaping, roofing, or anybody working in the heat. It can also be used to keep cool and reduce the risk of heat stress while gardening, hiking, playing sports and more.

ergodyne® GloWear 8933 Reflective Snapback Hat This hat is made with bright fluorescent lime fabric and reflective accents to boost visibility on busy job sites and in low-light conditions. This lightweight cotton-polyester hat is not stiff or bulky, and also features breathable mesh side and back panels for maximum airflow. It is designed with a soft and flexible stretch-fit elastic band for a snug but comfortable fit. This bright lime baseball hat is ideal for those working in road construction, transportation, baggage handling, municipalities or around moving vehicles. It's also great for outdoor recreational activities where you need to be seen, such as running or biking.

ergodyne® Chill-Its 6487 Cooling Performance Knit Multi-Band Cooling multi-band offers head and face protection from the sun, dust and flying debris, as well as cooling relief. Plus, it features evaporative technology for immediate cooling, and UPF 50+ protection against the sun's harmful rays when working outside. Simply wet the cooling headwear to activate instant cooling relief that lasts for hours. When activated, this multi-band is lightweight and refreshing for even the hottest days of the year. Anti-Odor treatment keeps it fresh all day long. Hang dry or machine wash as needed. This PPE safety headwear is incredibly versatile. The soft, stretchable knit material allows the multi-band to be worn as a cooling headband, neck gaiter, face mask or face covering, hat, dew rag and more. It can also be worn under a hard hat for moisture-wicking cooling when dry, and instant evaporative cooling relief when wet.

ergodyne® Skullerz 8957 Lightweight Ranger Hat and Bump Cap Insert This lightweight ranger hat features the Skullerz 8943F(x) hinged impact-resistant bump cap insert for flexible, breathable protection against bumps, scrapes, bruises and other minor head injuries. The included drawstring chin cord has an integrated breakaway feature for a custom, secure fit with reduced risk of injury from snag hazards. This polyester hat is not stiff or bulky and provides lightweight, breathable head and face shade for working in the sun. Featuring a wide brim that can be worn down or snapped up and out of the way, this sun hat features laser-perforated side panels for maximized airflow. Designed with a buckle closure and adjustable rear sizing strap for a custom fit. Reflective accents and piping help ensure workers are seen in low-light conditions.

ergodyne® Chill-Its 6484 Reflective Performance Knit Multi-Band Reflective multi-band protects workers from sun, dust and debris, while also featuring a unique all-over reflective print to enhance visibility at night or in low-light conditions. To keep workers comfortable and dry, this neck gaiter is made with an ultra-soft, stretchable and moisture-wicking rayon-spandex blend. The soft and flexible performance material allows this multi-band to be worn in a variety of ways, including a headband, neck gaiter, face mask or face covering, hat, dew rag and more. The low-bulk design can also be worn under a hard hat. Ideal for construction, landscaping, roofing or anyone needing additional face and neck protection from the elements. It can also be used for recreational activities such as gardening, hiking, fishing and more.

ergodyne® Chill-Its 6700FR Fire Resistant Cooling Tie Bandana Headband Activated polymers bring cooling relief along with fire resistant protection. Soak in water for 2 to 5 minutes to activate. Remains hydrated for up to four hours. Made of a modacrylic cotton blend fabric.

ergodyne® Skullerz 8976LED Class E Safety Helmet with LED Light A Class E Safety Helmet with a 6-Point suspension and an EPS foam interior halo for all-around impact protection, this helmet provides heavy-duty, yet lightweight and comfortable head protection designed to shield the front, back, top and sides of the head from falls, dropped objects or bumping into stationary objects. Compared to 4-Point suspension systems, the 6-Point suspension better disperses the force of an impact. The compact helmet design improves visibility and a chin strap ensures the helmet remains secure to the wearer's head upon impact or during sudden movement such as a slip, trip or fall. The suspension and shell design of this helmet provides added side, front and back protection compared to ANSI Type 2 requirements.

ergodyne® Chill-Its 6489 2-Layer Cooling Performance Knit Multi-Band 2-layer cooling multi-band meets CDC and WHO recommendations for multiple layers of protection while also shielding the face and neck from sun, dust and flying debris. When worn as a face covering, a nose clip along the top makes for a comfortable and secure fit while also reducing eyewear fogging. Evaporative technology can be easily activated with water for immediate cooling relief. This neck tube is rated to UPF 50+ for protection against the sun's harmful UV rays and features an anti-odor treatment for fresh all-day wear. A reflective accent enhances visibility in low-light conditions. Ideal for anyone requiring two layers of face protection, particularly those who are working or spending excess time in the heat. Simply wet the cooling headwear to activate instant cooling relief that lasts for hours. When activated, this multi-band is lightweight and refreshing for even the hottest days of the year. Machine wash and hang dry as needed.

ergodyne® N-Ferno 6492 2-Piece Thermal Fleece + Poly Multi-Band 2-piece thermal multi-band combines a soft fleece bottom with a dual-layer polyester top for versatile head, face and neck protection from cold, wind, sun, dust and debris. The bottom, intended for wear around the neck, is made with a soft fleece designed to provide warmth and comfort in cold temperatures while retaining breathability. The top, intended to be pulled up to cover the face or head, is made with a dual-layer, moisture-wicking polyester for breathable protection. This 2-piece multi-band is incredibly versatile, with the stretchable polyester enabling it to be worn as a neck gaiter, face mask or head covering. One size fits most, this multi-band is ideal for those working in construction, transportation, landscaping and more. Can also be worn for weekend activities such as hunting, climbing, running, cycling and skating.

ergodyne® Chill-Its 6486 FR Multi-Band FR multi-band offers head and face protection from arc flash hazards, as well as sun, dust and flying debris. The NFPA 70E-approved FR Nomex knit fabric has an EBT rating of 4.2 cal/cm2 and meets the requirements of ASTM F1506 for protection against arc flash. Stretchable and seam-free, this versatile FR neck gaiter can be comfortably worn as a face covering or face mask, headband, neck gaiter, hat, do rag and more. The low-profile design can also be worn under a hard hat without the bulk. Featuring high tech moisture-wicking technology for fast drying and an anti-odor treatment for all-day freshness. Machine wash as needed and hang to dry. This FR multi-band is ideal PPE for petrochemical, electrical, oil and gas and refinery work.

ergodyne® Chill-Its 6500 Wrist Terry Cloth Sweatband Thick soft terry keeps perspiration away from hands for safety and productivity. Elastic maintains snug fit. Includes two sweatbands that fit on both left and right wrists.

ergodyne® Skullerz 8976 Class E Safety Helmet With 6-Point suspension and an EPS foam interior halo for all-around impact protection, this helmet provides heavy-duty, yet lightweight and comfortable head protection designed to shield the front, back, top and sides of the head from falls, dropped objects or bumping into stationary objects. Compared to 4-Point suspension systems, the 6-Point suspension better disperses the force of an impact. The compact helmet design improves visibility, and a chin strap ensures the helmet remains secure to the wearer's head upon impact or sudden movement such as a slip, trip or fall. The suspension and shell design of this helmet provides added side, front and back protection compared to ANSI Type I requirements.

ergodyne® Skullerz 8980 Headband Light Mount with Fabric Strap Works with all Skullerz Headlamps (8978, 8981, 8987, 8993) to provide hands-free lighting. The soft and stretchable fabric strap features gentle silicone grips for a secure and comfortable fit on to heads, hard hats or caps.

3M™ SecureFit™ X5000 Series Safety Helmets Climbing helmet-inspired, brimless design meets occupational safety requirements while helping the wearer maintain greater situational awareness by delivering an obstruction-free field of vision. Low-sitting suspension system features exclusive, patented Pressure Diffusion Technology, enabling the system to self-adjust to the wearer as the smooth, easy-turning ratchet is tightened.

ergodyne® Skullerz 8967 Class E Lightweight Cap-Style Hard Hat 6-Point suspension provides lightweight yet durable protection to shield the top of the head from falling objects or bumping into stationary objects. This vented hard hat features a lightweight HDPE plastic shell for comfort without comprised protection.

ergodyne® Skullerz 8977LED Class C Safety Helmet with LED Light and Adjustable Venting With a 6-Point suspension and an EPS foam interior halo for all-around impact protection, this helmet provides heavy-duty, yet lightweight and comfortable head protection designed to shield the front, back, top and sides of the head from falls, dropped objects or bumping into stationary objects. Compared to 4-Point suspension systems, the 6-Point suspension better disperses the force of an impact. The compact helmet design improves visibility and a chin strap ensures the helmet remains secure to the wearer's head upon impact or during sudden movement such as a slip, trip or fall. The suspension and shell design of this helmet provides added side, front and back protection compared to a ANSI Type 1 requirements.

ergodyne® Chill-Its 6705CT Cooling PVA Hook & Loop Bandana Headband Advanced PVA material keeps you cool without the bulk and activates easily and quickly when run under water for one minute. Re-usable, just re-wet. Breakaway hook and loop closure maintains a snug fit.

ergodyne® Chill-Its 6710FR Fire Resistant Cooling Tie Bandana Triangle Hat Activated polymers bring cooling relief along with fire resistant protection. Soak in water for 2 to 5 minutes to activate. Remains hydrated for up to four hours. Re-usable, just re-wet. Made of a modacrylic cotton blend fabric.

ergodyne® Skullerz 8986 6-Point Hard Hat Suspension Replacement This safety hard hat replacement suspension is designed to securely attach to Skullerz Lightweight Hard Hats. This breathable safety hard hat suspension easily and securely installs using six built-in mounting locations on the hard hat shell.

ergodyne® N-Ferno 6807 Winter Baseball Cap with Ear Flaps This baseball cap is designed for versatile warmth in cold conditions. Made with stretchable soft fleece, this winter cap is designed to comfortably fit most head sizes.

ergodyne® Chill-Its 8939 Cooling Bucket Hat The Chill-Its 8939 Cooling Bucket Hat features a performance evaporative cooling material that provides immediate cooling relief when worn wet and wicks sweat and moisture when worn dry. Designed with a polyester-spandex blend, this cooling sun hat is flexible, easily folds up for storage and offers a comfortable and stretchable fit.

ergodyne® Skullerz 8943F(x) Universal Bump Cap Insert - Flexible Hinged This universal bump cap insert with flexible hinged wings delivers impact protection and an enhanced fit for larger head sizes and hairstyles. This lightweight, breathable and trimmable impact-resistant insert easily fits into any baseball cap, hat or other headwear for protection against bumps, scrapes, bruises and other minor head injuries. This bump cap is specifically designed to form to and protect varying head sizes and hairstyles, such as dreadlocks or larger natural hairstyles. The front and rear wings flex in and out, while the hinged design in the back allows hair to escape and lay flat, offering a non-bulky fit. With flexible sides and convenient trim-to-fit customization, this bump cap insert easily fits a variety of hats/caps and head shapes. The shell is made of lightweight, durable polyethylene with a ribbed top for enhanced crown impact protection.

ergodyne® Skullerz 8997 Anti-Scratch & Anti-Fog Face Shield Replacement for Cap-Style Hard Hat & Safety Helmet Designed to securely attach to Skullerz 8996 Face Shield Adapter Frame or as a replacement shield for Skullerz 8994 Hard Hat and Safety Helmet Face Shield. This anti-scratch and anti-fog lens easily installs with the face shield adapter (sold separately).

ergodyne® Skullerz 8966 Class C Lightweight Cap-Style Hard Hat with Adjustable Venting The 6-point suspension provides lightweight yet durable protection to shield the top of the head from falling objects or bumping into stationary objects. This vented hard hat features a lightweight HDPE plastic shell for comfort without comprised protection.

ergodyne® Skullerz 8952 Hard Shell Bump Cap Crafted with a durable polyethylene shell and engineered to guard against bumps, scrapes, bruises and other minor head injuries. The material not only resists cracking and breaking but also simplifies cleaning for added convenience. A ventilated suspension system enhances overall breathability and air circulation, making it an ideal choice for all-day use. The suspension is flexible in design and incorporates a removable, replaceable 4 mm thick foam-backed fabric sweatband to help keep users cool and comfortable even during the most demanding tasks. The recessed design on the sides ensures a comfortable fit with earmuffs for improved integration with hearing protection. The short, flat angled brim design enhances upward visibility. Achieving the perfect fit is easy with the adjustable suspension system. You can customize height, rear strap angle and size to your personal preference, ensuring comfort and security. Typically worn in tight spaces where protection from lower energy worker-generated impacts can occur such as low ceilings, beams, low pipes and other bump hazards, bump caps are not as heavy and bulky as more protective hard hats and safety helmets. They are ideal for mechanics and airline baggage handlers, as well as workers in food processing/manufacturing facilities, in-home services like inspection and install, pest control and other industries that do not require hard hat protection. Not for use where ANSI/ISEA Z89.1-2014 hard hats are required.

ergodyne® Skullerz 8994 Anti-Scratch & Anti-Fog Hard Hat Face Shield with Adapter for Cap-Style & Safety Helmet Designed to increase eye and face protection for those using Skullerz Cap-Style Hard Hats or Safety Helmets. This face shield protects against flying debris, splashes and particles and features a performance anti-fog and anti-scratch protective lens that will not wash or wear off over time.

ergodyne® Chill-Its 8934 Ranger Hat with Neck Shade The ranger hat with neck shade provides lightweight, breathable head, face and neck shade for working in the sun. This UPF 50+ sun hat features a roll-away neck shade and a wide brim that can be worn down or snapped up and out of the way for customized wear. Mesh side vents maximize airflow, and a moisture-wicking sweatband keeps sweat out of eyes to keep workers cool and comfortable. Includes breakaway drawstring chin cord and adjustable cinch cord in back for a custom, secure fit.

ergodyne® Skullerz 8998 Anti-Scratch & Anti-Fog Face Shield Replacement for Full Brim Hard Hat The Skullerz 8998 Anti-Scratch & Anti-Fog Hard Hat Face Shield Replacement Lens is designed to securely attach to Skullerz 8995 Face Shield Adapter for Skullerz Full Brim Hard Hats. This anti-scratch and anti-fog lens easily installs with the face shield adapter (sold separately).

ergodyne® N-Ferno 6821-ECO Recycled Fleece Balaclava Face Mask This recycled fleece balaclava face mask is designed with high quality, soft, stretchable recycled polyester and spandex material for warmth when working in the cold. The post-consumer recycled polyester is warm without being bulky and will fit comfortably under a hard hat or helmet. The longer length offers extra coverage for your head and neck and can be tucked into your jacket to seal out the cold. A reflective accent adds visibility at night or in low light. One size fits most and can be worn alone or under hard hats, ski helmets or other head protection. This is the perfect warm face mask for those who work in construction, freight/baggage, drilling/mining, oil/gas refining, iron/steel, delivery/service, landscaping/grounds, warehousing and for those who work in refrigerated areas. Can also be worn as a ski face mask or worn hunting, climbing, running, cycling, boating, skating or other outdoor sports. This balaclava is made from recycled polyester, which is produced by converting waste bottles into polyester yarn through chip making and spinning. The yarn is then knitted and dyed and sent to the manufacturer for proper balaclava cutting and sewing. Each balaclava is equivalent to approximately 7, 16.9 oz /500mL plastic water bottles.

ergodyne® N-Ferno 6815 Full Face Stretch Cap Stretch cap keeps ears and head and face protected from wind and cool conditions.

ergodyne® Skullerz® 8990 Lightweight Hard Hat Sweatband Replacement Designed to easily and securely attach to the Skullerz line of Lightweight Hard Hats for padded and breathable comfort on the job. This hard hat sweatband quickly attaches to the suspension headband of ergodyne Lightweight Hard Hats, using a series of holes that connect to integrated hooks of the suspension system.

ergodyne® Skullerz 8948 Mesh Do Rag Bandana and Bump Cap Insert This do rag bandana features the Skullerz 8943F(x) hinged impact-resistant bump cap insert for flexible, breathable protection against bumps, scrapes, bruises and other minor head injuries. Designed with larger head and hairstyles in mind, this do rag also offers an enhanced, flexible and non-bulky fit for small to average size heads and hairstyles, due to its simple design. This lightweight bandana is constructed with a stretchable mesh polyester for increased comfort, airflow and a cooler feel. The terry cloth sweatband wicks moisture away to prevent sweat from dripping into eyes. One size fits most, the back features an elastic band that stretches to comfortably fit a variety of head sizes. To be worn correctly, the three pieces of fabric should also be tied in a knot in the rear. Not bulky like a hard hat, bump caps are typically worn in spaces where worker-generated impact head protection is needed, like low ceilings, beams, low pipes and other bump hazards.

ergodyne® Skullerz 8969 Class E Lightweight Full Brim Hard Hat The 6-point suspension provides lightweight yet durable protection to shield the top of the head from falling objects or bumping into stationary objects. This vented hard hat features a lightweight HDPE plastic shell for comfort without comprised protection.

ergodyne® Skullerz 8978 Intrinsically Safe Headlamp Light This intrinsically safe headlamp light easily attaches directly to any Skullerz Hard Hat and Safety Helmet light mount or Headlamp Mounting Straps. This Class I, II and III/Division 1 safety light is specifically designed for hazardous locations where explosion risk due to fumes or fine dusts is high.

ergodyne® Skullerz 8977 Class C Safety Helmet with Adjustable Venting With a 6-point suspension and an EPS foam interior halo for all-around impact protection, this helmet provides heavy-duty, yet lightweight and comfortable head protection designed to shield the front, back, top and sides of the head from falls, dropped objects or bumping into stationary objects. Compared to 4-Point suspension systems, the 6-Point suspension better disperses the force of an impact. The compact helmet design improves visibility and a chin strap ensures the helmet remains secure to the wearer's head upon impact or during sudden movement such as a slip, trip or fall. The suspension and shell design of this helmet provides added side, front and back protection compared to ANSI Type 1 requirements.

ergodyne® Skullerz 8953 Hard Shell Bump Cap Sweatband Replacement This bump cap replacement easily and securely attaches to Skullerz 8951 and 8952 Bump Caps for padded and breathable comfort on the job. This bump cap sweatband quickly attaches to the suspension headband of Ergodyne Hard Shell Bump Caps, using a series of holes that connect to integrated hooks of the suspension system.

ergodyne® Skullerz 8961 Reflective Hard Hat & Safety Helmet Sticker Kit This reflective sticker kit is a stylish solution for boosting visibility on hard hats and safety helmets, ensuring increased safety in low-light conditions. Crafted from high-quality 3M™ High Intensity Prismatic Retroreflective material, these stickers exhibit exceptional durability, maintaining their position securely in both cold and hot environments. Designed specifically to complement Skullerz Hard Hats and Safety Helmets, these stickers will also enhance the overall aesthetics and deliver 360° of reflective accents to boost visibility of most hard hats and safety helmets. Simple peel-and-stick application. Color stickers provide the flexibility to coordinate seamlessly with work uniforms or to help differentiate roles on a jobsite.

ergodyne® Skullerz 8996 Face Shield Adapter Frame Replacement Securely attaches to Skullerz Hard Hat and Safety Helmet side accessory slots and accepts 8997 Cap-Style Hard Hat & Safety Helmet Face Shields, 8998 Full Brim Hard Hart Face Shields and 8999 Mesh Face Shield Replacements for full face protection on the jobsite.

ergodyne® Skullerz 8989 Mesh Face Shield with Adapter for Hard Hat & Safety Helmet Designed to increase eye and face protection for those using Skullerz Hard Hats or Safety Helmets. This metal mesh face shield protects against flying debris and particles while also permitting airflow for increased comfort.